Dreiturm DURO FILL pore filler

Permanent primer for strengthening worn-out, porous floor coverings. DURO FILL has excellent filling power and good compatibility with alcohol and disinfectants. Suitable for porous floor coverings (e.g. linoleum, stone floors, raw open wooden floors). DURO FILL is to be used exclusively for filling pores. A coating must then be applied as a wear layer. The application instructions of the floor covering manufacturer must be observed.

Ingredients:
15 – 30 % care components
Contains: preservatives
Other ingredients: Water-soluble solvents

Pretreatment:
Before coating with DURO FILL, basic cleaning must be carried out carefully with LINO-REIN + plus, D1 NEU or DURO EX, depending on the type of flooring. Then rinse the floor thoroughly with clean water to remove all
Remove any leftover cleaner and allow to dry. Apply DURO FILL to the dry, thoroughly cleaned floor. According to the flooring manufacturer, linoleum flooring must be left to dry for at least 12 to 24 hours before recoating, depending on the room climate.

Application:
For very absorbent floor coverings, dilutable with water up to 1:1

Final care:
DURO FILL is used as a permanent primer to fill pores and cannot be removed. After drying, a further coating must always be applied to protect the surface. Depending on the type of surface, our products DURO ULTRA, STONE CARE or RS MULTI-PURPOSE EMULSION are particularly suitable for this.

Consumption:
Depending on the absorbency of the floor covering, 1 - 3 liters per 100 m² (per application).