Kiehl Parketto-care cleaning care for wooden floors

cleaning care for wooden floors

Characteristics
Streak-free shine without polishing, self-shining. Hard-wearing, dirt-repellent and anti-slip. Can be used neat or diluted. This achieves a sliding friction coefficient of between 0.4 and 0.6 µ on the floor surface in accordance with DIN 18032 Part 2, which meets the requirements for sports halls (tested by FMPA Baden-Württemberg, Otto-Graf-Institut). Therefore, it is particularly suitable for cleaning and care in sports halls.

Product composition (according to 648/2004/EC)
Non-ionic surfactants < 5%, metal salt-free plastic dispersions (TBEP-free), polyethylene waxes, auxiliary materials, fragrances.
pH value (concentrate): approx. 7.5
pH value (working solution): approx. 7

scope
For the care and coating of hand-sealed real wood floors and prefinished parquet. For prefinished parquet, an adhesion test must be carried out before processing. Not suitable for waxed or oiled wooden surfaces.

Application
Newly manufactured wood surfaces (sealed on site) may only be cleaned dry during the curing time specified by the manufacturer, generally 8-14 days. Before applying Kiehl-Parketto-care, the surface must be dusted with a damp cleaning cloth. If dirt is firmly adhering, wipe it with a damp cloth using Kiehl-Parketto-clean concentrate.

Stressed wooden surfaces must first be cleaned using a dry cleaning machine (single-disk machine, suction ring, vacuum cleaner, Kiehl-Legno pad). Move the machine in a spiral until the surface is evenly cleaned, the dirt on the surface has been removed from the pores and a uniform appearance is achieved. Then remove the fine dust that has not been vacuumed up using wet cleaning cloths.

Interval care:
Add approx. 250 ml to 8 liters of cold water. Dip the cover in the cleaning solution, squeeze thoroughly and wipe the surface. Avoid standing water!

Spray cleaning for the targeted repair of care film damage:
Dilute 1:1 with cold water and apply using a spray bottle and a high-speed machine (approx. 1000 rpm).

polishing
The dried care layer can be compacted by polishing with high-speed machines (approx. 1000 rpm) and the Multi-Disc, without creating any smoothness.

Coating:
Perfect adhesion and appearance can only be guaranteed on clean surfaces that are free of grease, wax, silicone and dust. Shake well before use. Apply approx. 250 ml undiluted to the floor and immediately spread thinly over approx. 10 square meters using a mop or flat mop in evenly overlapping strips. Continue working quickly, overlapping (wet on wet). Depending on the surface condition, 1 - 2 applications are necessary at intervals of approx. 90 minutes. Only dry films form a durable care layer.

Notice
Protect from frost!

Special Information
Not a consumer product according to 1999/44/EC Art.1!